Saniflo Sanishower Residential Gray Water Drain Pump System, Medium Duty

The Sanishower drain pump from Saniflo is used to pump gray water away from a variety of fixtures in residential applications. Easy to install and small enough to fit underneath a shower base, it is ideal for medium-duty applications. When the water enters the Sanishower, it activates a micro switch in the pressure chamber, which in turn starts the motor. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum. Water enters the chamber and is pumped away into the sanitary sewer. The unit pumps wastewater upward 12 feet and/or 100 feet horizontally (with gravity fall). Once the water level in the container goes back down, the unit deactivates until water enters again. A normal operating cycle for the Sanishower can be as short as 2 - 10 seconds, making power consumption minimal. All plumbing codes require connection to a vent system. Please note that the vent system should be a 2-way air vent. It is also highly recommended for the drain pump to be connected to a Ground Fault Interrupter (GFI) circuit. Pump out wastewater with ease with the Sanishower Residential Drain Pump from Saniflo.

• The Sanishower drain pump is used to pump gray water away from a variety of fixtures
• The system is able to discharge the waste up to 12 feet vertical and/or 100 feet horizontal
• Discharges gray water from a shower or sink; The gray water will drain into the system on either side of the housing
• Easy to install and small enough to fit underneath a cabinet or shower base; Ideal for medium-duty applications
• 0.2 HP oil-filled thermally protected motor with a discharge rate of 12 feet; Certification code: CSA (IPC, NSPC); Connections: Sink, shower
• Material: Plastic, metal
• Color: White
• Dimensions (L x W x H): 6.50 x 13.88 x 5.75 inches
• Weight: 12.00 pounds
• Manufacturer warranty: 3 Years