Sunnytech Low Temperature Stirling Mini Hot Live Steam Engine LT001-BJ001

Features: Model: LT001 Color: Silver plate and Gold flywheel Speed up to 180-200 RPM Start temperature difference: about 20℃ Celsius/68 Fahrenheit Material: carbon steel, nickel-plated carbon steel, stainless steel, glass, bronze, PVC foam and plastics Size: 10*10*14cm/3.94* 3.94* 5.51 in Weight:250g/0.55Ib Packing list: 1* stirling engine 1* very detailed user manual Features: Model: BJ001 Speed:1300 to 1500 RPM Size: 60*55*120MM / 2.36* 2.16* 4.72 in Material: Brass + Stainless Steel Weight:260g / 9.17 oz Packing List: *1 x Steam Boiler *1 x Alcohol Burner *3 x bracket

• OPERATION EASILY----Pour a cup of hot coffee, put the stirling on the cup, it run magically. When it slows down, the coffee temperature is suitable for drink. Enjoy physical powertrain mechanism display and coffee. It also can work on top of ice cube. Some guys put the stirling on cup of hot water and put small ice cubes on the stirling upper plate. This makes the temperature difference much bigger than normal, then it runs even more fast and crazy. Just enjoy the toy.
• LONG LASTING----It can run for 24+ hours continuous without any broken if there are continuous power supplies. One customer put the stirling on USB hot plate (excluded in the package) and the stirling runs on his desk for weeks. Don’t burn the stirling base or put it in the stove, the stirling plastic parts will damage.
• UNIQUE STYLING ---- This is a Mini hot live steam engine, It's small size. Vertical modeling, design dignified retro, exquisite workmanship. By heating the small boiler, it can run normally. It is a high-end handicraft that is collected and appreciated.
• EASY OPERATION ---- Open the brass boiler, and inject the water to be 2/3 volume, leave another 1/3 volume for the steam; Fill the alcohol burner with your 95% alcohol (we recommend this fuel) and light it. After about 2 minutes of heating to the brass boiler, you would see steam coming out from the air outlet, then pull the flywheel and the flywheel will run madly.
• MORE YOU NEED TO READ BEFORE YOU BUY IT---- There are two steam holes in the middle stand base which connect the cylinder.so the steam can go through that holes to the cylinder and drive the engine. In the beginning of the engine running, some water will be push out by steam from this steam holes. and some water will spray out with steam from the gas outlet in the top of the middle stand base as bellow pictures showed below. You can suck the water by tissue paper.